Collectie 157 Flsun Sr Cura Profile Vers

Collectie 157 Flsun Sr Cura Profile Vers. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. But the beta is rocking now. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint.

Coolste Flsun Super Racer Cura 4 10 Profil G Code

Apr 09, 2021 · commenter jörn asked for my cura profile. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Sun jun 13, 2021 1:02 am.

Can't wait for prusaslicer to add a profile also!

In cura 4.10 it seems that the files are ignored, profile not seen. I haven't personally used it, but it evidently works. Thanks, but actually it is me that posted it on the facebook group. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Can't wait for prusaslicer to add a profile also!

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile... I haven't personally used it, but it evidently works. Apr 24, 2019 · it mast be 1.75. In cura 4.10 it seems that the files are ignored, profile not seen. I see there is good support coverage for flsun. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Thanks, but actually it is me that posted it on the facebook group. Can't wait for prusaslicer to add a profile also! I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Flsun sr settings for octoprint #13. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

In cura 4.10 it seems that the files are ignored, profile not seen. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Sun jun 13, 2021 1:02 am. I see there is good support coverage for flsun. Apr 24, 2019 · it mast be 1.75. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.. Apr 09, 2021 · commenter jörn asked for my cura profile.

Jun 13, 2021 · please add a profile for the flsun super racer. Apr 09, 2021 · commenter jörn asked for my cura profile. In cura 4.10 it seems that the files are ignored, profile not seen. I haven't personally used it, but it evidently works... Apr 09, 2021 · commenter jörn asked for my cura profile.

Jun 13, 2021 · please add a profile for the flsun super racer.. Jun 13, 2021 · please add a profile for the flsun super racer. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Can't wait for prusaslicer to add a profile also! In cura 4.10 it seems that the files are ignored, profile not seen. Apr 09, 2021 · commenter jörn asked for my cura profile.. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

Flsun sr settings for octoprint #13... In cura 4.10 it seems that the files are ignored, profile not seen. Can't wait for prusaslicer to add a profile also! Thanks, but actually it is me that posted it on the facebook group. Apr 24, 2019 · it mast be 1.75. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Flsun sr settings for octoprint #13. Jun 13, 2021 · please add a profile for the flsun super racer. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Could you please add the super racer (sr).. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

I haven't personally used it, but it evidently works. Apr 24, 2019 · it mast be 1.75. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Flsun sr settings for octoprint #13. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Sun jun 13, 2021 1:02 am. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I see there is good support coverage for flsun. I haven't personally used it, but it evidently works. But the beta is rocking now.. Sun jun 13, 2021 1:02 am.

Apr 09, 2021 · commenter jörn asked for my cura profile. Apr 24, 2019 · it mast be 1.75. Sun jun 13, 2021 1:02 am.

Apr 24, 2019 · it mast be 1.75. Apr 09, 2021 · commenter jörn asked for my cura profile. But the beta is rocking now. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Could you please add the super racer (sr) Apr 24, 2019 · it mast be 1.75... I haven't personally used it, but it evidently works.

I see there is good support coverage for flsun. Apr 09, 2021 · commenter jörn asked for my cura profile. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.. Flsun sr settings for octoprint #13.

I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Flsun sr settings for octoprint #13. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. I haven't personally used it, but it evidently works. In cura 4.10 it seems that the files are ignored, profile not seen. Apr 09, 2021 · commenter jörn asked for my cura profile. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando.. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint.

Apr 09, 2021 · commenter jörn asked for my cura profile. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I see there is good support coverage for flsun. Sun jun 13, 2021 1:02 am. Apr 24, 2019 · it mast be 1.75. Jun 13, 2021 · please add a profile for the flsun super racer. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Could you please add the super racer (sr) I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. But the beta is rocking now.

I see there is good support coverage for flsun.. I haven't personally used it, but it evidently works. Could you please add the super racer (sr) But the beta is rocking now. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Flsun sr settings for octoprint #13. Thanks, but actually it is me that posted it on the facebook group. I see there is good support coverage for flsun. Apr 09, 2021 · commenter jörn asked for my cura profile.. Apr 24, 2019 · it mast be 1.75.

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.. Could you please add the super racer (sr) In cura 4.10 it seems that the files are ignored, profile not seen. I see there is good support coverage for flsun. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. But the beta is rocking now. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Apr 24, 2019 · it mast be 1.75... I haven't personally used it, but it evidently works.

I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I haven't personally used it, but it evidently works. Can't wait for prusaslicer to add a profile also! Thanks, but actually it is me that posted it on the facebook group. Flsun sr settings for octoprint #13. Apr 09, 2021 · commenter jörn asked for my cura profile. Jun 13, 2021 · please add a profile for the flsun super racer. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer... Could you please add the super racer (sr)

Flsun sr settings for octoprint #13. Jun 13, 2021 · please add a profile for the flsun super racer. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I see there is good support coverage for flsun. But the beta is rocking now. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Apr 24, 2019 · it mast be 1.75. Apr 09, 2021 · commenter jörn asked for my cura profile. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer... I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint.

Sun jun 13, 2021 1:02 am. I haven't personally used it, but it evidently works. Can't wait for prusaslicer to add a profile also! Jun 13, 2021 · please add a profile for the flsun super racer. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Apr 24, 2019 · it mast be 1.75. Could you please add the super racer (sr) I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. But the beta is rocking now.. Flsun sr settings for octoprint #13.

In cura 4.10 it seems that the files are ignored, profile not seen. I haven't personally used it, but it evidently works. Thanks, but actually it is me that posted it on the facebook group. Can't wait for prusaslicer to add a profile also! In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. In cura 4.10 it seems that the files are ignored, profile not seen. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Apr 24, 2019 · it mast be 1.75. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Apr 09, 2021 · commenter jörn asked for my cura profile. I see there is good support coverage for flsun. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

I see there is good support coverage for flsun. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Can't wait for prusaslicer to add a profile also! I see there is good support coverage for flsun. Flsun sr settings for octoprint #13. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer... Flsun sr settings for octoprint #13. I see there is good support coverage for flsun. Thanks, but actually it is me that posted it on the facebook group. Could you please add the super racer (sr) I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Apr 24, 2019 · it mast be 1.75. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group.

In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Can't wait for prusaslicer to add a profile also! I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Jun 13, 2021 · please add a profile for the flsun super racer. Apr 09, 2021 · commenter jörn asked for my cura profile. Thanks, but actually it is me that posted it on the facebook group. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I haven't personally used it, but it evidently works. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint.

Can't wait for prusaslicer to add a profile also! I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I haven't personally used it, but it evidently works. In cura 4.10 it seems that the files are ignored, profile not seen. Thanks, but actually it is me that posted it on the facebook group.

I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint.. Sun jun 13, 2021 1:02 am. I haven't personally used it, but it evidently works. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. In cura 4.10 it seems that the files are ignored, profile not seen. Thanks, but actually it is me that posted it on the facebook group. Could you please add the super racer (sr) Apr 09, 2021 · commenter jörn asked for my cura profile. Thanks, but actually it is me that posted it on the facebook group.

Thanks, but actually it is me that posted it on the facebook group.. I haven't personally used it, but it evidently works. In cura 4.10 it seems that the files are ignored, profile not seen. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. But the beta is rocking now. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. But the beta is rocking now. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Apr 24, 2019 · it mast be 1.75. Flsun sr settings for octoprint #13. Sun jun 13, 2021 1:02 am. Apr 09, 2021 · commenter jörn asked for my cura profile. Can't wait for prusaslicer to add a profile also! In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I see there is good support coverage for flsun.. In cura 4.10 it seems that the files are ignored, profile not seen.

Apr 24, 2019 · it mast be 1.75... I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Flsun sr settings for octoprint #13. Apr 09, 2021 · commenter jörn asked for my cura profile.

Thanks, but actually it is me that posted it on the facebook group.. Sun jun 13, 2021 1:02 am. Apr 24, 2019 · it mast be 1.75. In cura 4.10 it seems that the files are ignored, profile not seen. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. But the beta is rocking now. Can't wait for prusaslicer to add a profile also! Jun 13, 2021 · please add a profile for the flsun super racer. Sun jun 13, 2021 1:02 am.

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Can't wait for prusaslicer to add a profile also! I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I haven't personally used it, but it evidently works. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Flsun sr settings for octoprint #13. Apr 24, 2019 · it mast be 1.75. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Apr 09, 2021 · commenter jörn asked for my cura profile.. Apr 09, 2021 · commenter jörn asked for my cura profile.

Apr 24, 2019 · it mast be 1.75.. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.. Jun 13, 2021 · please add a profile for the flsun super racer.

I see there is good support coverage for flsun. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I haven't personally used it, but it evidently works. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. But the beta is rocking now. Can't wait for prusaslicer to add a profile also! Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Jun 13, 2021 · please add a profile for the flsun super racer. In cura 4.10 it seems that the files are ignored, profile not seen.. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.

Jun 13, 2021 · please add a profile for the flsun super racer. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. But the beta is rocking now. Can't wait for prusaslicer to add a profile also! Jun 13, 2021 · please add a profile for the flsun super racer.

But the beta is rocking now. Could you please add the super racer (sr). I see there is good support coverage for flsun.

But the beta is rocking now. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. But the beta is rocking now. Apr 24, 2019 · it mast be 1.75.

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile... Can't wait for prusaslicer to add a profile also! Jun 13, 2021 · please add a profile for the flsun super racer. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Thanks, but actually it is me that posted it on the facebook group. Flsun sr settings for octoprint #13. Apr 09, 2021 · commenter jörn asked for my cura profile. Sun jun 13, 2021 1:02 am. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I haven't personally used it, but it evidently works... I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.

Flsun sr settings for octoprint #13. Could you please add the super racer (sr) Can't wait for prusaslicer to add a profile also! Apr 24, 2019 · it mast be 1.75. Flsun sr settings for octoprint #13. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I haven't personally used it, but it evidently works. Thanks, but actually it is me that posted it on the facebook group... But the beta is rocking now.

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Flsun sr settings for octoprint #13. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Jun 13, 2021 · please add a profile for the flsun super racer. Can't wait for prusaslicer to add a profile also! I see there is good support coverage for flsun. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint... I see there is good support coverage for flsun.

I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls.. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Thanks, but actually it is me that posted it on the facebook group.. Apr 09, 2021 · commenter jörn asked for my cura profile.

I haven't personally used it, but it evidently works... Could you please add the super racer (sr) I see there is good support coverage for flsun. Thanks, but actually it is me that posted it on the facebook group.

In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. But the beta is rocking now. Apr 24, 2019 · it mast be 1.75. Jun 13, 2021 · please add a profile for the flsun super racer. Apr 09, 2021 · commenter jörn asked for my cura profile. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Sun jun 13, 2021 1:02 am. Flsun sr settings for octoprint #13. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group.. But the beta is rocking now.

I haven't personally used it, but it evidently works... In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Could you please add the super racer (sr) But the beta is rocking now. I see there is good support coverage for flsun. I haven't personally used it, but it evidently works. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Can't wait for prusaslicer to add a profile also! Sun jun 13, 2021 1:02 am. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I haven't personally used it, but it evidently works.

Apr 24, 2019 · it mast be 1.75.. Can't wait for prusaslicer to add a profile also! Could you please add the super racer (sr).. Sun jun 13, 2021 1:02 am.

Flsun sr settings for octoprint #13. Apr 09, 2021 · commenter jörn asked for my cura profile. Flsun sr settings for octoprint #13. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I haven't personally used it, but it evidently works. Can't wait for prusaslicer to add a profile also! Could you please add the super racer (sr) Apr 24, 2019 · it mast be 1.75... Apr 09, 2021 · commenter jörn asked for my cura profile.

Apr 24, 2019 · it mast be 1.75... I haven't personally used it, but it evidently works. Thanks, but actually it is me that posted it on the facebook group. Apr 24, 2019 · it mast be 1.75. Flsun sr settings for octoprint #13. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. But the beta is rocking now. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group.

Apr 09, 2021 · commenter jörn asked for my cura profile. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I see there is good support coverage for flsun. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Apr 24, 2019 · it mast be 1.75. Sun jun 13, 2021 1:02 am... Thanks, but actually it is me that posted it on the facebook group.

Apr 24, 2019 · it mast be 1.75.. In cura 4.10 it seems that the files are ignored, profile not seen. But the beta is rocking now. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint.. Can't wait for prusaslicer to add a profile also!

Thanks, but actually it is me that posted it on the facebook group. Sun jun 13, 2021 1:02 am. I haven't personally used it, but it evidently works... Could you please add the super racer (sr)

I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. . Apr 24, 2019 · it mast be 1.75.

Apr 09, 2021 · commenter jörn asked for my cura profile. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls.. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

Apr 24, 2019 · it mast be 1.75... I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Thanks, but actually it is me that posted it on the facebook group. Flsun sr settings for octoprint #13. Jun 13, 2021 · please add a profile for the flsun super racer. I haven't personally used it, but it evidently works. Could you please add the super racer (sr) Jun 13, 2021 · please add a profile for the flsun super racer.

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Could you please add the super racer (sr) I see there is good support coverage for flsun. Jun 13, 2021 · please add a profile for the flsun super racer. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile... Can't wait for prusaslicer to add a profile also!

I haven't personally used it, but it evidently works... Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Apr 09, 2021 · commenter jörn asked for my cura profile. In cura 4.10 it seems that the files are ignored, profile not seen. Can't wait for prusaslicer to add a profile also! I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. I see there is good support coverage for flsun. Apr 24, 2019 · it mast be 1.75. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls.. Flsun sr settings for octoprint #13.

Sun jun 13, 2021 1:02 am.. Thanks, but actually it is me that posted it on the facebook group. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Could you please add the super racer (sr) In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Flsun sr settings for octoprint #13. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I see there is good support coverage for flsun. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.

But the beta is rocking now. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Apr 24, 2019 · it mast be 1.75. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls.. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group.

In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando.. But the beta is rocking now. Flsun sr settings for octoprint #13. Thanks, but actually it is me that posted it on the facebook group. In cura 4.10 it seems that the files are ignored, profile not seen... Could you please add the super racer (sr)

Apr 09, 2021 · commenter jörn asked for my cura profile. Apr 09, 2021 · commenter jörn asked for my cura profile. Apr 24, 2019 · it mast be 1.75. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. In cura 4.10 it seems that the files are ignored, profile not seen. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. But the beta is rocking now. Jun 13, 2021 · please add a profile for the flsun super racer.

Sun jun 13, 2021 1:02 am... Flsun sr settings for octoprint #13. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Sun jun 13, 2021 1:02 am.

Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.. Apr 24, 2019 · it mast be 1.75. Can't wait for prusaslicer to add a profile also! I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. In cura 4.10 it seems that the files are ignored, profile not seen. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. I haven't personally used it, but it evidently works.

In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando... Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Can't wait for prusaslicer to add a profile also! Sun jun 13, 2021 1:02 am.

I haven't personally used it, but it evidently works.. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls... Apr 24, 2019 · it mast be 1.75.

In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando.. Apr 24, 2019 · it mast be 1.75. Flsun sr settings for octoprint #13. Could you please add the super racer (sr) I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I see there is good support coverage for flsun.

I haven't personally used it, but it evidently works. Sun jun 13, 2021 1:02 am. In cura 4.10 it seems that the files are ignored, profile not seen. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Flsun sr settings for octoprint #13. Apr 24, 2019 · it mast be 1.75. Can't wait for prusaslicer to add a profile also! Apr 09, 2021 · commenter jörn asked for my cura profile. Jun 13, 2021 · please add a profile for the flsun super racer.

Apr 09, 2021 · commenter jörn asked for my cura profile. Could you please add the super racer (sr) I haven't personally used it, but it evidently works. Apr 09, 2021 · commenter jörn asked for my cura profile. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Thanks, but actually it is me that posted it on the facebook group. I see there is good support coverage for flsun. Apr 24, 2019 · it mast be 1.75. Sun jun 13, 2021 1:02 am. But the beta is rocking now.

Thanks, but actually it is me that posted it on the facebook group. Apr 09, 2021 · commenter jörn asked for my cura profile. I see there is good support coverage for flsun. Thanks, but actually it is me that posted it on the facebook group. Apr 24, 2019 · it mast be 1.75. Jun 13, 2021 · please add a profile for the flsun super racer. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando.. Apr 24, 2019 · it mast be 1.75.

I haven't personally used it, but it evidently works. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Could you please add the super racer (sr) Jun 13, 2021 · please add a profile for the flsun super racer. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I haven't personally used it, but it evidently works. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando... Thanks, but actually it is me that posted it on the facebook group.

Apr 24, 2019 · it mast be 1.75. Can't wait for prusaslicer to add a profile also! Sun jun 13, 2021 1:02 am. Jun 13, 2021 · please add a profile for the flsun super racer. Could you please add the super racer (sr) Apr 24, 2019 · it mast be 1.75.. Jun 13, 2021 · please add a profile for the flsun super racer.

Jun 13, 2021 · please add a profile for the flsun super racer.. Thanks, but actually it is me that posted it on the facebook group. But the beta is rocking now... I haven't personally used it, but it evidently works.

Apr 24, 2019 · it mast be 1.75.. Jun 13, 2021 · please add a profile for the flsun super racer. Can't wait for prusaslicer to add a profile also!. Flsun sr settings for octoprint #13.

I haven't personally used it, but it evidently works. Sun jun 13, 2021 1:02 am. Apr 09, 2021 · commenter jörn asked for my cura profile. In cura 4.10 it seems that the files are ignored, profile not seen. I haven't personally used it, but it evidently works. Apr 24, 2019 · it mast be 1.75. But the beta is rocking now. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. But the beta is rocking now.

Jun 13, 2021 · please add a profile for the flsun super racer. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. Flsun sr settings for octoprint #13. I see there is good support coverage for flsun. Apr 24, 2019 · it mast be 1.75. In cura 4.10 it seems that the files are ignored, profile not seen. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint... Thanks, but actually it is me that posted it on the facebook group.

I haven't personally used it, but it evidently works. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Thanks, but actually it is me that posted it on the facebook group. But the beta is rocking now. I haven't personally used it, but it evidently works. Apr 09, 2021 · commenter jörn asked for my cura profile. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls.. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.

Jun 13, 2021 · please add a profile for the flsun super racer... Apr 24, 2019 · it mast be 1.75. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. I haven't personally used it, but it evidently works. Apr 09, 2021 · commenter jörn asked for my cura profile. I see there is good support coverage for flsun. Sun jun 13, 2021 1:02 am.. Apr 09, 2021 · commenter jörn asked for my cura profile.

I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls... Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Sun jun 13, 2021 1:02 am. Jun 13, 2021 · please add a profile for the flsun super racer. Could you please add the super racer (sr) Apr 09, 2021 · commenter jörn asked for my cura profile. I haven't personally used it, but it evidently works. Can't wait for prusaslicer to add a profile also!

I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. I haven't personally used it, but it evidently works. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Jun 13, 2021 · please add a profile for the flsun super racer. In cura 4.10 it seems that the files are ignored, profile not seen. I haven't personally used it, but it evidently works.

I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Could you please add the super racer (sr) Can't wait for prusaslicer to add a profile also! Apr 24, 2019 · it mast be 1.75.

I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I haven't personally used it, but it evidently works. Apr 24, 2019 · it mast be 1.75. Can't wait for prusaslicer to add a profile also! I see there is good support coverage for flsun. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. But the beta is rocking now. I haven't personally used it, but it evidently works.

Jun 13, 2021 · please add a profile for the flsun super racer. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Could you please add the super racer (sr) Apr 24, 2019 · it mast be 1.75. Jun 13, 2021 · please add a profile for the flsun super racer. Flsun sr settings for octoprint #13. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Thanks, but actually it is me that posted it on the facebook group. I see there is good support coverage for flsun... I haven't personally used it, but it evidently works.

Apr 24, 2019 · it mast be 1.75. Sun jun 13, 2021 1:02 am.. Thanks, but actually it is me that posted it on the facebook group.

Flsun sr settings for octoprint #13. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Could you please add the super racer (sr) Apr 24, 2019 · it mast be 1.75.. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.

But the beta is rocking now.. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Can't wait for prusaslicer to add a profile also! Jun 13, 2021 · please add a profile for the flsun super racer. Flsun sr settings for octoprint #13. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer.

Can't wait for prusaslicer to add a profile also!. Apr 24, 2019 · it mast be 1.75.. Could you please add the super racer (sr)

In cura 4.10 it seems that the files are ignored, profile not seen. Sun jun 13, 2021 1:02 am... Thanks, but actually it is me that posted it on the facebook group.

I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Could you please add the super racer (sr) Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile. Apr 24, 2019 · it mast be 1.75. In cura 4.10 it seems that the files are ignored, profile not seen. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. Can't wait for prusaslicer to add a profile also!.. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando.

Apr 09, 2021 · commenter jörn asked for my cura profile. I see there is good support coverage for flsun. Could you please add the super racer (sr) Can't wait for prusaslicer to add a profile also! Thanks, but actually it is me that posted it on the facebook group. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I haven't personally used it, but it evidently works.. In cura 4.10 it seems that the files are ignored, profile not seen.

Flsun sr settings for octoprint #13. Jun 13, 2021 · please add a profile for the flsun super racer. I printed a test print and almost immediately, the printer arranged it's arms in a way that it couldn't handle and two of the arms snapped off of their balls. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. Sun jun 13, 2021 1:02 am... Thanks, but actually it is me that posted it on the facebook group.

I haven't personally used it, but it evidently works... Flsun sr settings for octoprint #13. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Could you please add the super racer (sr) Apr 09, 2021 · commenter jörn asked for my cura profile.. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando.

Apr 24, 2019 · it mast be 1.75.. Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group. In any case, my cura 4.11 beta has a profile for flsun super racer by thushan fernando. I've copied the files added in the correct resources paths, and the profile is seen for cura 4.9 to add the sr printer. I haven't personally used it, but it evidently works... But the beta is rocking now.

Apr 09, 2021 · commenter jörn asked for my cura profile... Jun 13, 2021 · please add a profile for the flsun super racer. Can't wait for prusaslicer to add a profile also! I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Could you please add the super racer (sr) Got this baseline cura 4.0 file from the fb flsun qq 3d printer owners group.. But the beta is rocking now.

Sun jun 13, 2021 1:02 am... Thanks, but actually it is me that posted it on the facebook group. Apr 24, 2019 · it mast be 1.75. Can't wait for prusaslicer to add a profile also! Flsun sr settings for octoprint #13. I tried to setup octoprint today and i tried to use the settings in the cura profile to setup the profile in octoprint. Until now i have been stuck with cura 4.4.0 cause that's what came with my printer and no one had an updated profile.